LINEAR INTERPOLATION G00: Modal: [YES]

FORMAT: G00 X1.25 Y2.0 Z0.3

G00: Instructs the machine to move at rapid speed to the finish point set by the addresses X, Y, Z. Because the moving path might not be in straight line, care must be taken not to crash the tool into the work piece or clamps.

Program Example

G90 G80 G40 M3

G92 X0 Y0 Z0

G00 Z0.020000

        X1.354220 Y2.296880

G01 Z-0.00300 F140

        X1.350150 Y2.262530

        X1.393720 Y2.228250

LINEAR INTERPOLATION G01: Modal [YES]

FORMAT: G01 X1.25 Y2.0 Z0.3 F140

G01: Instructs the machine to move to the finish point set by the addresses X, Y, Z at the feed rate set by the address F.